manualshive.com logo in svg

QSC LA108, Руководство пользователя, Страница: 31 / 50

Поделиться
Скачать
QSC LA108 Скачать руководство пользователя страница 31

31

Increasing Angle

1.  Push Angle Lever on both sides all the way in, until they make 

a click sound and stay depressed.

2.  Slightly lift loudspeaker weight to release internal pin.

3.  Lower loudspeaker into the next angle position, until it makes 

a click sound.

Horizontal Array

There may be situations where very narrow horizontal coverage is 
required to avoid spillover, such as a stage side-fill or drum monitor. In this 
application, the LA108/LA112 enclosures can be safely rotated onto their 
side to create tightly-packed horizontal arrays, which can be seated on a 
solid base (typically a road-case or a subwoofer).

Rubber feet on either side of the enclosure have been included to prevent 
side panels from damage.

NOTE: 

 

When rotating a LA108 or LA112 onto its side, 

there is only one correct orientation – with the high frequency 
waveguide towards the top. An arrow on the rear panel 
indicates which side of the enclosure the high frequency 
waveguide is located.

— Figure 46 — 

1.5°

6°

— Figure 44 —

 

— Figure 45 — 

Содержание LA108



















































Отзывы:

Нет отзывов