Qsan XCubeSAN XS5224D, Руководство владельца оборудования

Страница: 52 / 134

34 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
3.3. Installing the Optional Host Cards
The XCubeSAN series comes with two on-board 10GbE iSCSI ports on each controller. If you
want to expand the number of host ports, purchase QSAN host cards (optional components)
will be the fastest and most cost-efficiency choice.
There are four types of host cards that are available for selection. You can configure a Fibre
Channel SAN by using QSAN 16Gb Fibre Channel host cards; you can choose a iSCSI SAN
by using 10GbE via SFP+, 10GBASE-T, or 1GBASE-T iSCSI host cards. The table below
shows the available host card types, model names, and their descriptions.
Table 3-4 Available Host Cards for XCubeSAN Series
Model Name Picture Description Applied Models
HQ-16F4S2 4-port 16Gb Fibre Channel
Host Card
(SFP+)
XS5200 Series
XS3200 Series
HQ-10G4S2 4-port 10GbE iSCSI Host Card
(SFP+)
HQ-01G4T 4-port 1GBASE-T iSCSI Host
Card
(RJ45)
CAUTION:
 You must remove the controller module from the system chassis
before starting the host card installing procedures.
 Host card can NOT hot plug in the controller module. Hot plug in the
host card might cause system hang up. You should remove the
controller module from the system chassis before installing /
removing host card. Please DO NOT attempt to hot plug in the host
card.
Following figure is the overview of the host card installation slots.