Qsan XCubeDAS Series, Руководство пользователя

Страница: 27 / 53

CLI Command Sets
15
disk
Parameters
none
Example
Show the installed drives status.
CLI > disk
Quantity of installed drive: 8
Slot Vendor Model Link Type WWN
---------------------------------------------------------------------------
01 TOSHIBA AL14SEB120N 12G SAS 500003963823B652
02 TOSHIBA AL14SEB120N 12G SAS 500003963823B64E
03 TOSHIBA AL14SEB120N 12G SAS 500003963823B52E
04 TOSHIBA AL14SEB120N 12G SAS 500003963823B656
05 SEAGATE ST500NM0001 6G SAS 5000C50041C2FCBD
06 SEAGATE ST500NM0001 6G SAS 5000C500420D54C1
07 SEAGATE ST500NM0001 6G SAS 5000C50041C292B5
08 SEAGATE ST500NM0001 6G SAS 5000C50041C34281
09 SEAGATE ST500NM0001 6G SAS 5000C50041B655F1
10 SEAGATE ST500NM0001 6G SAS 5000C500420D33AD
11 SEAGATE ST500NM0001 6G SAS 5000C50041C28561
12 SEAGATE ST500NM0001 6G SAS 5000C500420D61FD
2.3.3. Set Zone Configurations (zone)
Command
zone
Description
Show the zoning or clear/set zoning of SAS ports. Zoning is the mapping of SAS port(s) to
drive slot(s). The default zoning is all ports map to all drive slots.
Syntax
zone {clear | set <h1 | h2 | h3 | h4 | h5> <1 2 3 4 5 …N | *> }
Parameters