Qsan Technology XCubeNAS XN8008RE, Руководство пользователя

Страница: 44 / 64

42
© Copyright 2019 QSAN Technology, Inc. All Rights Reserved.
6. Reset to Default
If you want to reset XCubeNAS to factory default, there are several options to choose from.
Please follow the steps below:
Reset to default by using the reset button on the back of XCubeNAS:
1. Reset network settings: Press and hold the reset button on the rear panel for 3 seconds ,
a short beep sound for 1 second will be heard. The administrator password and all the
network settings will be reset, the system configuration will result in:

Reset Admin password to the default value: 1234.

All networking set to "DHCP".

All data service ports set to default setting (All data service enable and set to
default port).

VLAN will be terminated.

Vswitch will be deleted.

Port trunking will be disabling.

After configs are deleted, restart the XCubeNAS.

Log out QSAN Cloud.

DNS settings.

DDNS and UPNP settings.