20
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
3.3.
Install the Optional Adapter Card
Your XCubeNAS supports a PCIe add-on adapter cards that demand high bandwidth and
capacity expansion, PCIe Gen3 x8, marked on the back of your XCubeNAS. You may need to
replace the high profile bracket (suited for PC) in your adapter card with the low profile
bracket before installing the card on your XCubeNAS. To install the adapter card, please
follow the steps as illustrated below:
1.
Shutdown your XCubeNAS and disconnect power adapter, network cable(s) or any other
device/cable that is attached to your system to prevent any possible damages.
2.
Remove the rear top cover.
Loosen the screw on the back of the XCubeNAS.
Pull the rear top cover, and put it aside.
CAUTION:
When you remove the rear top cover, the sensitive internal components
are exposed. Please avoid touching any irrelevent components to prevent
damage.
