background image

5.

Reinsert the drives.

6.

Continue with the QuTS hero installation.

Recovering Unintentionally Removed Healthy Drives

The NAS supports exclusive RAID recovery technology to recover failed RAID disk volumes from
unintentional disconnection or removal of drives. Users can recover an inactive RAID 1, RAID 5, RAID 6,
RAID 10, RAID 50, RAID 60, triple mirror, and RAID-TP volume from degraded mode.

Disk Volume

RAID

Recovery

Support

Number of Disks

Maximum Number of Removed Drives

RAID 0

Yes

≥ 2

N/A

RAID 1

Yes

2

1

RAID 5

Yes

≥ 3

1

RAID 6

Yes

≥ 4

2

RAID 10

No

≥ 4 (Must be an even
number)

One or two member drives in two different
pairs fail.

RAID 50

Yes

≥ 6

One disk per subgroup fails.

RAID 60

Yes

≥ 8

Two disks per subgroup fail.

Triple Mirror

Yes

Multiple of 3. (For example,
3, 6, 9, 12 disks and so
forth.)

2

RAID-TP

Yes

≥ 5

3

Support and Other Resources

QNAP provides the following resources:

Resource

URL

Documentation

https://docs.qnap.com

Compatibility List

https://www.qnap.com/compatibility/

NAS Migration Compatibility

https://www.qnap.com/en/nas-migration

Expansion Unit Compatibility

http://www.qnap.com/go/compatibility-expansion

Service Portal

https://service.qnap.com

Product Support Status

https://www.qnap.com/product/eol.php

Downloads

https://download.qnap.com

Community Forum

https://forum.qnap.com

QNAP Accessories Store

https://shop.qnap.com/

TS-h1886XU-RP User Guide

Troubleshooting   

48

Содержание TS-h1886XU-RP





























































Отзывы: