QNAP TS-h1886XU-RP Скачать руководство пользователя | Manualshive

Страница: 45 / 60

background image

5. NAS Migration

You can migrate data and settings from your current NAS to another NAS model with minimal disruptions by
installing all the hard drives from the source NAS to the destination NAS. RAID configuration and other
settings are retained on the destination NAS after migration.

NAS Migration Requirements

You can only migrate drives and system settings to specific NAS models, depending on your source NAS.
For the list of NAS models compatible with direct NAS migration, see

https://www.qnap.com/en/nas-

Your device must meet the following requirements:

• The destination NAS must run on the same QuTS hero version as the source NAS (or later).

Important

Due to incompatibilities in file system, system migration between QTS NAS and QuTS hero
NAS is not supported.

Warning

Migrating drives between QTS NAS and QuTS hero NAS can cause data corruption.

• The destination NAS must have sufficient free drive bays to accommodate all the drives that you are

migrating from the source NAS.

For NAS models that do not support NAS migration, see

How to Migrate Data and Folder Permissions

between QTS and QuTS hero with HBS3

Status and Setting Changes After NAS Migration

The status of NAS data and settings varies after migration.

Data and Settings

After NAS Migration

Registered myQNAPcloud name

Your registered myQNAPcloud name is not migrated.

Encrypted shared folders

If the NAS does not support file system encryption,
encrypted shared folders are not migrated.

Warning

To prevent data loss, back up and save
the encryption keys of encrypted shared
folders in a safe place. You can also
choose to decrypt shared folders before
migration.

TS-h1886XU-RP User Guide

NAS Migration

44

«
...
43
44
45
46
47
...
»

Содержание TS-h1886XU-RP





























































Отзывы:

Нет отзывов

Похожие инструкции для TS-h1886XU-RP

G-DRIVE mobile USB

Бренд: G-Technology Страницы: 13

Бренд: RAID Страницы: 108

18-51000 Series

Бренд: Salsbury Industries Страницы: 5

Бренд: U-Line Страницы: 3

Бренд: Kanguru Страницы: 12

Бренд: Extreme Tools Страницы: 2

Бренд: JetStor Страницы: 71

Бренд: Macpower & Tytech Страницы: 18

URBAN 100.1P DEC

Бренд: garofalo Страницы: 16

Бренд: Archos Страницы: 12

Бренд: Seagate Страницы: 36

Бренд: DFI Страницы: 28

Бренд: OYEN DIGITAL Страницы: 1

XCubeNAS Series

Бренд: Qsan Страницы: 29

Бренд: QNAP Страницы: 12

Parker's Wine Guide WNG-400

Бренд: Franklin Страницы: 23

Бренд: Clarke Страницы: 4

Бренд: NetApp Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды