QNAP TS-h1886XU-RP Скачать руководство пользователя

Страница: 38 / 60

18.

Optional: Click

Go to NAS Management

Tip

Click

Go to NAS Management

to set more advanced QuTS hero configuations and settings.

For details, see QuTS hero User Guide.

Installing QuTS hero Using the Cloud Key

Warning

Installing QuTS hero deletes all data on the drives. Back up your data before proceeding.

Note

You can revert to QTS operating system anytime. For details, see QuTS hero user guide.

Power on the device.

Connect the device to the internet.

Go to the QNAP Cloud Installation page using one of the following methods:

• On your computer, go to

http://install.qnap.com/

• Scan the QR code on the NAS using a mobile device.

The web page lists all the uninitialized QNAP NAS devices on the local network.

Locate the NAS in the list and then click

Initialize

Note

If your NAS is not listed, follow the instructions on the web page to specify the Cloud Key on the
NAS.

The installation wizard opens in the default web browser.

Create an account or sign in to myQNAPcloud.

Note

You must return to this page to complete the installation after creating an account.

Specify the myQNAPcloud device name for the NAS.

Note

• The myQNAPcloud device name is used when remotely accessing the NAS.

• For security purposes, the myQNAPCloud Link remote connection service will be disabled

on your NAS after initialization. You can enable it by connecting to QuTS hero through LAN
and then installing myQNAPCloud Link.

Click

Next

The

Smart Installation Guide

opens in the default web browser.

Perform any of the following actions.

• To check for the latest available version, click

Start

The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the

Smart

Installation Guide

TS-h1886XU-RP User Guide

Installation and Configuration

Содержание TS-h1886XU-RP





























































Результаты поиска

Содержание TS-h1886XU-RP

Отзывы:

Похожие инструкции для TS-h1886XU-RP

Бренды по названию

Популярные бренды

QNAP TS-h1886XU-RP, Руководство пользователя

Результаты поиска

Содержание TS-h1886XU-RP

Отзывы:

Похожие инструкции для TS-h1886XU-RP

Бренды по названию

Популярные бренды