QNAP TS-h1886XU-RP-R2 Скачать руководство пользователя страница 46

Страница: 46 / 62

5. NAS Migration

You can migrate data and settings from your current NAS to another NAS model with minimal disruptions

by installing all the hard drives from the source NAS to the destination NAS. RAID configuration and other

settings are retained on the destination NAS after migration.

NAS Migration Requirements

You can only migrate drives and system settings to specific NAS models, depending on your source NAS. For

the list of NAS models compatible with direct NAS migration, see

https://www.qnap.com/en/nas-migration

Your device must meet the following requirements:

• The destination NAS must run on the same QuTS hero version as the source NAS (or later).

Important

Due to incompatibilities in file system, system migration between QTS NAS and QuTS hero NAS

is not supported.

Warning

Migrating drives between QTS NAS and QuTS hero NAS can cause data corruption.

• The destination NAS must have sufficient free drive bays to accommodate all the drives that you are

migrating from the source NAS.

For NAS models that do not support NAS migration, see

How to Migrate Data and Folder Permissions

between QTS and QuTS hero with HBS3

Status and Setting Changes After NAS Migration

The status of NAS data and settings varies after migration.

Data and Settings

After NAS Migration

Registered myQNAPcloud name

Your registered myQNAPcloud name is not

migrated.

Encrypted shared folders

If the NAS does not support file system encryption,

encrypted shared folders are not migrated.

Warning

To prevent data loss, back up and save

the encryption keys of encrypted shared

folders in a safe place. You can also

choose to decrypt shared folders before

migration.

TS-h1886XU-RP User Guide

NAS Migration

Содержание TS-h1886XU-RP-R2































































Результаты поиска

Содержание TS-h1886XU-RP-R2

Отзывы:

Похожие инструкции для TS-h1886XU-RP-R2

Бренды по названию

Популярные бренды

QNAP TS-h1886XU-RP-R2, Руководство пользователя

Результаты поиска

Содержание TS-h1886XU-RP-R2

Отзывы:

Похожие инструкции для TS-h1886XU-RP-R2

Бренды по названию

Популярные бренды