c.
Verify that the expansion units are listed.
Connecting USB Expansion Units
The TS-x77XU supports a maximum of two USB expansion units and is compatible with the following
models:
• UX-800U-RP
• UX-1200U-RP
1.
Connect the expansion unit to the NAS.
a.
Connect the USB cable to the USB 3.0 Type-B port on the expansion unit.
b.
Connect the USB cable to a USB 3.0 Type-A port on the NAS.
2.
Power on the expansion units.
3.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QTS as administrator.
b.
Go to
Main Menu
>
Storage & Snapshots
>
Overview
>
System
.
c.
Verify that the expansion units are listed.
Hot-swapping Redundant Power Supply Units
NAS devices with redundant power supply units (PSUs) support hot-swapping.
Warning
TS-x77XU User Guide
Installation and Configuration
20
