QNAP TS-433 Скачать руководство пользователя страница 5

Страница: 5 / 51

2. Product Overview

This chapter provides basic information about the QNAP device.

About TS-433

The TS-433 is a user-friendly lightweight NAS designed for backup, synchronization, remote access, and

home entertainment. Its ARM Cortex-A55 4-core processor and 4 GB memory provide smooth and seamless

data transmission for multiple users. With a sleek and simple tower design, the TS-433 is an ideal NAS for

homes and small offices.

Hardware Specifications

Warning

• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-

authorized service center for maintenance or replacement. Any attempt to repair or

perform maintenance procedures on the product by you or an unauthorized third

party invalidates the warranty.

• QNAP is not responsible for any damage or data loss caused by unauthorized

modifications and installation of unsupported third-party applications.

For details, see the

QNAP Warranty Terms and Conditions

Ordering P/N

Pre-installed memory

TS-433-4G

4 GB RAM (non-expandable)

Component

TS-433

Processor
CPU

ARM Cortex-A55 4-core

Frequency

2.0 GHz

Architecture

ARM 64-bit

Encryption engine

AES-256

Memory
Pre-installed memory

4 GB RAM (non-expandable)

Note

The TS-433 reserves some RAM for shared graphics

memory.

Maximum memory

4 GB RAM (non-expandable)

Flash memory

4 GB (dual-boot OS protection)

Storage
Drive bays

4 x 3.5-inch SATA 6 Gbps

Tip

The drive bays are backward compatible with SATA 3

Gbps drives.

TS-433 User Guide

Product Overview

Содержание TS-433




















































Результаты поиска

Содержание TS-433

Отзывы:

Похожие инструкции для TS-433

Бренды по названию

Популярные бренды

QNAP TS-433, Руководство пользователя

Результаты поиска

Содержание TS-433

Отзывы:

Похожие инструкции для TS-433

Бренды по названию

Популярные бренды