4.
Install a second handle to the other side of the chassis.
5.
Power on the NAS.
Adding USB Expansion Units
The TS-431XeU supports connecting to one or two USB expansion units depending on the model. You can
use any of the following configurations.
• One UX-1200U-RP unit
• Two UX-800U-RP units
• One UX-1200U-RP unit and one UX-800U-RP unit
1.
Connect the expansion unit to the NAS.
a.
Connect the USB cable to the USB 3.0 Type-B port on the expansion unit.
b.
Connect the USB cable to a USB 3.0 Type-A port on the NAS.
TS-431XeU User Guide
Installation and Configuration
20