QNAP TS-431X Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 43

background image

END OF TERMS AND CONDITIONS

FCC Notice

FCC Class B Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.

This device may not cause harmful interference.

2.

This device must accept any interference received, including interference that may cause undesired
operation.

Note

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Important

Any modifications made to this device that are not approved by QNAP Systems, Inc. may
void the authority granted to the user by the FCC to operate this equipment.

CE Notice

TS-431X User Guide

Notices

41

«
...
40
41
42
43
»

Содержание TS-431X












































Отзывы:

Нет отзывов

Похожие инструкции для TS-431X

Бренд: Feider Machines Страницы: 20

Бренд: Seagate Страницы: 24

HazMat station EPO-2

Бренд: Denios Страницы: 6

Бренд: Wolfcraft Страницы: 96

Бренд: HermanMiller Страницы: 5

Бренд: Würth Страницы: 196

Бренд: NetApp Страницы: 79

Бренд: Tuff Nano Страницы: 17

Бренд: US Polymers Страницы: 17

Бренд: NITEO TOOLS Страницы: 8

WD SATA Hard Drives

Бренд: Western Digital Страницы: 2

Parker's Wine Guide WNG-400

Бренд: Franklin Страницы: 23

Бренд: XtendLan Страницы: 14

Бренд: Tait Страницы: 27

Бренд: OLT Страницы: 35

Бренд: Fantom Drives Страницы: 2

GreenDrive Quad

Бренд: Fantom Drives Страницы: 10

Бренд: Fantom Drives Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды