Installing 2.5-inch Hard Drives or Solid-State Drives on 2.5-inch Trays
For the list of compatible drive models, go to
https://www.qnap.com/compatibility
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the NAS.
2.
Remove the drive tray.
a.
Pull the handle to release the tray.
b.
Pull the tray out.
3.
Install a drive on the tray.
a.
Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes
on the bottom of the tray.
b.
Attach the screws.
TS-1886XU-RP User Guide
Installation and Configuration
18
