QNAP TS-1253BU Скачать руководство пользователя страница 42

Страница: 42 / 56

LED

Status

Description

Drive

Green

The drive is ready.

Flashes Green

The drive is being accessed.

Red

The drive has encountered an error.

Flashes Red 5 times per
second

The drive is being located in the operating system.

Off

No drive is detected.

Expansion LED

Amber

A USB JBOD, SAS JBOD, or REXP is connected.

Off

No JBOD is connected.

PSU LED

Green

Power is being supplied to the PSU and the NAS is
powered on.

Amber
Available on the following
models:

• TS-853BU

• TS-853BU-RP

• TS-1253BU

• TS-1253BU-RP

Power supply failure.

Off

No power is supplied to the PSU or the NAS is powered
off.

Beep Alarm

Duration

Frequency

Description

Short beep (0.5 seconds) 1

• The NAS is starting up.

• The NAS is shutting down (software shutdown).

• The user pressed the Reset button.

• The operating system was updated.

The user tried to copy the NAS data to the external
storage device from the front USB port, but the data
cannot be copied.

TS-x53BU User Guide

Basic Operations

Содержание TS-1253BU

























































Результаты поиска

Содержание TS-1253BU

Отзывы:

Бренды по названию

Популярные бренды

QNAP TS-1253BU, Руководство пользователя

Результаты поиска

Содержание TS-1253BU

Отзывы:

Бренды по названию

Популярные бренды