QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 253 / 369

253
private NAS services published on the myQNAPcloud website.
4. Select the connection method: the myQNAPcloud Connect (VPN) utility and/or
myQNAPcloud website.
5. To send instructions to use the myQNAPcloud service to users via email, select the
users and click "Send Invitation".
6. Enter the email address. Click "Send".
Note : To use this function, the email server settings must be properly configured in
"System Settings" > "Notification" > "SMTP Server".
C loudLink
CloudLink is an innovative service provided by QNAP for remote access to your NAS
over the network without changing router settings - even if UPnP is not supported.
After you enable the service (click the switch on the blue banner to enable/disable the
service) the direct access link will be shown on the page and you can provide this link
to your friends for them to access to your NAS, using their mobile device or computer.
Ac c e s s C ontrol
This function allows you to control who can search for your device and access
published NAS services on the myQNAPcloud website or with mobile apps remotely via
CloudLink. The following options are available:
Public: Everyone can search for your device on the myQNAPcloud website and
access your public services.
Private: Only you can access your NAS remotely on the myQNAPcloud website or
with mobile apps via CloudLink.
Customized: You can specify who is allowed to access your device on the
myQNAPcloud website or with mobile apps by entering their registered accounts
here. Or you can add email addresses of your friends who are not currently
myQNAPcloud members to send them an invitation. To set access controls, first set
the "Device access controls" to "Customized", then click "Add" to add QID account
holders.
SSL C e rtific a te
myQNAPcloud SSL certificates are used to provide secured connections between the