QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 120 / 369

120
2. Select "Unlock this device". Click "Next".
3. Enter the encryption password or upload the key file. Select "Save encryption key" to
save the password in a hidden location on a hard drive of the NAS. The NAS will
automatically unlock the encrypted external storage device every time the device is
connected.
M a na ging the e nc ry ption ke y
1. To change the encryption password or download an encryption key file, click
"Encryption Management".
2. Select "Manage encryption key". Click "Next".
3. Select to change the encryption password or download the encryption key file to
the local PC.
Da ta Sha ring
Select one of the following settings for an external storage device connected to a 1-bay
NAS:
Data sharing: Use the external drive for storage expansion of the NAS.
Q-RAID 1: Configure the external drive and a local hard drive on the NAS as Q-RAID
1. Q-RAID 1 enables one-way data synchronization from the NAS to the external
storage device but does not offer any RAID redundancy. Note tha t the e x te rna l
driv e will be form a tte d whe n Q - RAID 1 is e x e c ute d.
After Q-RAID 1 has been executed once, the NAS data will be automatically copied to
the external storage device whenever it is connected to the NAS.
Note :
Only one external drive can be set as Q-RAID 1 at one time.
The maximum capacity supported by Q-RAID 1 is 2TB.
It is recommended to use an external storage device with the same capacity as
the internal NAS drive. If the storage capacity of the external storage device is
too small to synchronize with the internal hard drive, the device can only be used
for data sharing.
HD Station will reboot when external devices are unmounted.