background image

Setting

Description

Password

Specify a password that contains 1 to 16 characters
from any of the following groups:

• Letters: A to Z, a to z

• Numbers: 0 to 9

• Special characters: . - _ ~ ! @ # $ % ^ & ( ) { }

• Doesn't start or end with a space.

Port

Specify a port number to access the RTRR server.

Upload limit

Specify an upload rate limit for the RTRR server.

• Unlimited: No limit is set.

• Maximum: Specify a maximum limit.

Download limit

Specify a download rate limit for the RTRR server.

• Unlimited: No limit is set.

• Maximum: Specify a maximum limit.

Use TCP BBR congestion control

Optimizes transmission speeds allowing for higher
bandwidth and lower latency

4.

Optional: Configure Network Access Approval. 

a.

Select 

Allow approved connections

Note

If no IP addresses are added, all connections are allowed.

The 

Approved Connections

 table appears.

b.

Click 

Add

. The 

Add IP Address

 window opens.

c.

Select an IP address version.

d.

Specify an IP address or IP address & subnet mask.

e.

Select an access privilege.

f.

Click 

Add

.

5.

Click 

Apply

.

Disabling the RTRR Server

1.

Open HBS 3.

2.

Go to 

Services

 > 

RTRR Server

 .

3.

Click 

.

HBS 3 disables the RTRR server.

QTS 4.5.x User Guide

Hybrid Backup Sync   

380

Содержание QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Отзывы: