3. Click Add.
The Add ACL - MAC Address window opens.
4. Configure the ACL settings.
Setting
User Action
ACL No.
Specify a number between 1 and 255.
Source
MAC address
Specify the source MAC address.
Destination
MAC address
Specify the destination MAC address.
Port
Select specific ports to apply the ACL rule, or select All to apply the rule
to all ports.
Permission
Select one of the following:
• Allow
• Deny
5. Click Save.
QSS adds the MAC address-based ACL rule.
Deleting a Network Setting
1. Log in to QSS.
2. Go to Configuration.
3. Select a network setting.
Note
Deleting network settings is applicable only to ACL rules, link aggregation groups, static MAC
addresses, and VLANs.
4. Click .
A confirmation message appears.
5. Click Delete.
QSS deletes the network setting.
Monitoring Network Settings
You can monitor the following network settings in the Configuration section. These settings can be used to
monitor and diagnose switch operations.
1. Log in to QSS.
2. Go to Configuration.
3. Select a network setting.
QSW-M2106 User Guide
QSS
23
