QNAP QSW-M2106-4C, Руководство пользователя

Страница: 14 / 45

4. Basic Operations
This chapter describes basic switch operations.
LEDs
LEDs indicate system status and related information when the switch is powered on. The following LED
information applies only when the switch is connected to the network.
For details on the location of the LEDs, see Front Panel LEDs .
LED Status Description
System Status Green The device is ready.
Flashes green • The device is being initialized.
• The firmware is being updated.
Note
When updating the firmware, do not remove
the power cord or USB cable, and do not
force-exit the application.
• The device is being reset.
Red A fatal device error occurred.
Off The device is powered off.
2.5 GbE RJ45
(2.5G speed)
Green The link speed is operating at 2.5 Gbps.
Flashes green Data is being transmitted.
Off There is no network connection.
2.5 GbE RJ45
(1G/100M/10M
speed)
Orange The link speed is operating at 1 Gbps, 100 Mbps, or 10
Mbps.
Flashes orange Data is being transmitted.
Off There is no network connection.
10 GbE SFP+
(10G speed)
Green The link speed is operating at 10 Gbps.
Flashes green Data is being transmitted.
Off There is no network connection.
10 GbE SFP+
(1G speed)
Orange The link speed is operating at 1 Gbps.
Flashes orange Data is being transmitted.
Off There is no network connection.
10GbE SFP+/
RJ45 combo
(RJ45, 10G)
Green The link speed is operating at 10 Gbps.
Flashes green Data is being transmitted.
Off There is no network connection.
10GbE SFP+/
RJ45 combo
(RJ45, 5G/
2.5G/1G/100M
speed)
Orange The link speed is operating at 5 Gbps, 2.5 Gbps, 1 Gbps, or
100 Mbps.
Flashes orange Data is being transmitted.
Off There is no network connection.
QSW-M2106 User Guide
Basic Operations 13