QNAP QHora-301W Скачать руководство пользователя

Страница: 38 / 68

4. Configure the settings.

Setting

User Action

Destination

Specify a static IP address where connections are routed to.

Subnet Mask

Specify the IP address of the destination's subnet mask.

Next Hop

Select from the following next hop options:

• WAN Port: Select an available WAN port IP address for the routing path.

• IP Address: Specify the IP address of the closest or most optimal router in

the routing path.

Metric

Specify the number of nodes that the route will pass through.

Note

Metrics are cost values used by routers to determine the best

path to a destination network.

Description

Enter a description for the static route.

5. Click Apply.

QuRouter creates the IPv4 static route.

Adding an IPv6 Static Route

1. Open QuRouter.

2. Go to Network > Routing > IPv6 / Static Route .

3. Click Add Static Route.

The Add Static Route window appears.

4. Configure the settings.

Setting

User Action

Destination

Specify a static IP address where connections are routed to.

Prefix length

Select the prefix length for IPv6 addressing.

Next Hop

Select from the following next hop options:

• WAN Port: Select an available WAN port IP address for the routing path.

• VLAN / Access mode: Select a preconfigured access mode VLAN ID.

Metric

Specify the number of nodes that the route will pass through.

Note

Metrics are cost values used by routers to determine the best

path to a destination network.

Description

Enter a description for the static route.

5. Click Apply.

QuRouter creates the IPv6 static route.

QHora-301W User Guide

Network Settings

Содержание QHora-301W





































































Результаты поиска

Содержание QHora-301W

Отзывы:

Похожие инструкции для QHora-301W

Бренды по названию

Популярные бренды

QNAP QHora-301W, Руководство пользователя

Результаты поиска

Содержание QHora-301W

Отзывы:

Похожие инструкции для QHora-301W

Бренды по названию

Популярные бренды