3. Connect the power cord to the electrical outlet.
4. Power on the device.
Drive Installation
The QGD-1600P is compatible with 2.5-inch hard drives and 2.5-inch solid-state drives.
The QGD-1602P is compatible with 2.5-inch hard drives, 2.5-inch solid-state drives, and M.2 solid-state drives.
Installing 2.5-Inch Drives
The device is compatible with 2.5-inch hard disk drives and 2.5-inch solid-state drives.
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Remove the case cover.
.
3. Remove the drive module.
a. Remove the screws.
b. Lift the drive module out of the device.
QGD Rackmount Switch User Guide
Installation and Configuration
20
