manualshive.com logo in svg

QNAP GM-1000, Руководство пользователя

Поделиться
Скачать
QNAP GM-1000 Скачать руководство пользователя страница 22

Setting Up the NAS

Important

Read all safety requirements and information in 

Safety Information

 carefully before setting

up the NAS or installing NAS components.

1.

Place your NAS device in an environment that meets the requirements. 
For details, see 

Installation Requirements

.

2.

Install the drives. For details, see the following topics:

•

Installing 3.5-inch Hard Drives on 3.5-inch Trays

•

Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays

•

Installing 2.5-inch Solid-State Drives on 2.5-inch Trays

•

Installing M.2 Solid-State Drives on the System Board

For a list of compatible drives and expansion cards, go to 

https://www.qnap.com/en/compatibility/

.

3.

Install expansion cards. 
For details, see 

Installing Expansion Cards

.

4.

Install memory modules. 
For details, see 

Replacing Memory Modules

.

5.

Connect the power cord and all applicable cables.

6.

Power on the NAS. 
For details, see 

Front Panel Buttons

.

7.

Install QuTS hero. 
For details, see 

QuTS hero Installation

.

8.

Log on to QuTS hero.

GM-1000 User Guide

Product Overview   

21

Содержание GM-1000






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды