QMS QMS 4525, Руководство пользователя системы

Страница: 126 / 180

Preventing
Inaccurate Bin
Level Readings
QMS 4525 Print System User's Guide 6-26
Preventing Inaccurate Bin Level
Readings
When the sorter is available on your printer, you should do the follow-
ing to prevent inaccurate bin level readings:
„
Do not put paper in an empty sorter bin.
If you do, the printer thinks that the bin still contains the num-
ber of sheets that it contained from the last print job. For
example, if the bin contained 50 sheets from the last print job
and you place a sheet in it before the next print job, the
counter remains set at 50.
„
Do not switch the printer off while the sorter contains output.
When it is switched back on, the bin-level counters remain set
even though the output has been removed. All of this means
that your next print job will not sort correctly due to inaccurate
bin level readings.
Print Image Problems
Partial images may be caused by trying to print outside of the image-
able area, timing problems, or belt speed problems. Try one of the fol-
lowing suggestions to correct the problem:
„
Change to a larger size paper.
„
Adjust the margin(s) through your application.
™