QMS Magicolor CX, Руководство пользователя

Страница: 52 / 222

Printing on
Different Types
of Print Media
QMS magicolor CX User's Guide 2-24
Printing Labels
For best results when printing labels, format labels through your appli-
cation and then run a test print on plain paper to check formatting and
avoid wasting label sheets.
1 See “Refilling the Media Cassette” on page 16 or “Using the
Manual Feed Tray” on page 20 for information on loading
media in the cassette.
Make sure you place the labels printing-side up with the top edge
feeding into the printer first.
2 If you haven't previously, set up the tray you want to use for
printing on Paper:
a At the printer control panel, press the Online/Offline key.
b Press the Tray Select key until the LED for tray you want to
use for labels is lit on the control panel.
c Press the Media key until the Paper LED is lit on the control
panel.
d Press the Online/Offline key.
3 Use your application's print setup feature to select Paper
printing and any other printing options you want.
» Note: Any time you select a media type from the driver, the tray
you're printing to must already have been set from the control
panel for the desired media type.
4 Send your job.
Printing on Letterhead or Other Preprinted
Media
Print letterhead or other preprinted media the same way labels are
printed. Make sure you place the media printing-side up with the let-
terhead edge feeding into the printer first.