QMS Magicolor CX, Руководство пользователя

Страница: 191 / 222

HP-GL and PCL
Error Codes
4-49 Troubleshooting
HP-GL and PCL Error Codes
The following tables list error codes that could appear on the printer
message window when running HPGL or PCL emulations.
PostScript Errors
Error Handler is a diagnostic tool that identifies PostScript errors
encountered during a print job. It is accessed through the Administra-
tion/Startup Options/Do Error Handler menu in the printer’s control
panel (the printer must be rebooted for it to take effect). If you call for
the QMS Customer Response Center, you may be asked to turn on
this option. Or, if you are familiar with the PostScript page description
language, you could turn on Error Handler and refer to the
PostScript
HP-GL
Error
Code
Explanation
PCL
Error
Codes
Explanation
0 Not enough memory for
job. 0 Not enough memory for
job.
1 Too many
transformations. 1 State lost.
2 Math error. 2 Math error.
3 Job aborted. 3 Job aborted.
4 Instruction not
recognized. 4 Out of memory for
macros.
5 Wrong number of
parameters. 5 Disk full. Cannot store
fonts.
6 Out of range parameter,
or illegal character. 6 - 13 Internal error 1 - 8.
7 Not used.
8 Unknown character set.
9 Position overflow.
10 Buffer overflow.