QMS Magicolor CX, Руководство пользователя

Страница: 135 / 222

Repacking the
Printer
3-59 Maintenance
Remove the OPC Belt Cartridge
▲
Caution: The OPC belt is extremely sensitive to bright light and direct
sunlight. Limit exposure to 2 minutes. While the printer is being moved,
store the cartridge in its original shipping bag. If you don’t have this
bag, carefully wrap it in a piece of dark, heavy cloth, and place it where
it will not get scratched or damaged. If exposure exceeds 2 minutes,
put the cartridge in a dark place to recover before using it again;
depending on exposure, recovery may take up to 2 hours.
Also, handle the OPC belt cartridge carefully by its green end-handle
or the two green side-handles only: the belt’s extremely sensitive to
hand oils, moisture, solvents, corrosives, dust, and scratches, all of
which will reduce print quality.
1 Open the manual feed tray by pushing the top-right corner to
release the spring latch.
2 Lift the green handle
of the OPC belt car-
tridge up to unlock it,
and pull the cartridge
straight out of the
printer.