QMS Magicolor 6100, Руководство по эксплуатации

Страница: 69 / 224

2((*
& ( " '
2((*
Your
magicolor
6100 has the ability to print PDF files directly just as it does for Post-
Script and PCL files. This can be a time-saving feature. Direct printing removes the
need to open the file in an application, such as Acrobat Reader, then print the file via a
Post-Script or PCL driver. Your printer supports PDF version 1.2 and below. The PDF
file can be sent to the printer using any method (lpr, ftp, etc.) that is normally used to
print PostScript or PCL files.
C" .* 52(
The unique structure of PDF files requires that you make some adjustments to your
printer’s default memory clients. All PDF files contain information at the end of the files
that is needed to correctly format them in the printer. Because of this, the entire file
must be spooled into the printer before it can be interpreted. In order to spool the
Default
300, 600 or 1200 dpi—your printer’s default is the highest resolution
available for the amount of RAM installed in the printer (see “Minimum
System Memory Requirements” on page 3-4 for more information).
Notes Whenever possible, set the print resolution through your application. If the
print resolution can’t be set through the application, you can set it through
the configuration menu, the printer driver, or QMS Document Option
Commands (DOCs).
If you want the printer to use a lower default resolution when you restore
defaults, set this option to your choice (and make any other necessary
configuration settings), and then use the Administration/Miscellaneous/
Save Defaults menu to save your custom defaults. See “Working with
Custom Configurations” on page 3-12 in chapter 2 of the Reference
manual for more information.
In addition, after you lower the default resolution, you should reconfigure
the printer memory (Administration/Memory/Quick Config menu) to
distribute it better for that particular resolution. For example, if you set the
default resolution to 600 dpi when your printer has enough memory to print
at 1200 dpi, the frame buffer remains configured for 1200 dpi, which
means that printer memory that could be better used somewhere else is
being wasted.