QMS Magicolor 6100, Руководство по эксплуатации

Страница: 203 / 224

,& ;8
(4
,
,& ;8(4
» Note: If you don’t have a lower feeder unit installed, skip to the next section.
1 Remove the plastic side covers from the
sides of the lower feeder unit.
» Note: If you have two lower feeder units
installed, remove the plastic side covers from
the top lower feeder unit only.
2 Locate the cable at the left rear of the lower
feeder unit that connects it to the printer,
and then unplug it.
3 Loosen the thumbscrew that attaches the
bracket to the lower feeder unit until the
bracket moves freely away from the lower
feeder unit.
103mati.eps
)0