QMS CrownCopy страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 92

background image

Trademarks

The following are trademarks or registered trademarks of their respective owners.
Other product names mentioned in this manual may also be trademarks or registered
trademarks of their respective owners. Registered trademarks are registered in the
United States Patent and Trademark Office; some trademarks may also be registered in
other countries. QMS, magicolor, and the QMS logo are registered trademarks of QMS,
Inc., and PS Executive Series, Crown, CrownCopy, and the Crown seal are trademarks
of QMS, Inc.

Proprietary Statement

The digitally encoded software included with your QMS product is Copyrighted © 1996
by QMS, Inc. All Rights Reserved. This software may not be reproduced, modified,
displayed, transferred, or copied in any form or in any manner or on any media, in
whole or in part, without the express written permission of QMS, Inc.

Copyright Notice

This manual is Copyrighted © 1996 by QMS, Inc., One Magnum Pass, Mobile, AL
36618. All Rights Reserved. This manual may not be copied in whole or in part, nor be
transferred to any other media or language, without the express written permission of
QMS, Inc.

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

»

Note:

To comply with part 15 of FCC rules, shielded interface cables must be used.

▲

Caution:

Any modifications or changes to this product not expressly approved in

writing by the manufacturer responsible for compliance to Federal Regulations could
void the user's authority to operate this product within the Laws and Regulations of the
Federal Communications Commission.

«
1
2
3
4
...
»

Содержание CrownCopy





























































































Отзывы:

Нет отзывов

Похожие инструкции для CrownCopy

SmartSource Edge

Бренд: burroughs Страницы: 33

D-LX 100 All-In-One

Бренд: DURAG Страницы: 36

PROFESSIONAL T8

Бренд: ICON Страницы: 28

Бренд: Launch Страницы: 37

Бренд: DAVID Страницы: 120

Бренд: Jay-tech Страницы: 25

Бренд: Radio Shack Страницы: 26

Бренд: Radio Shack Страницы: 44

Бренд: Radio Shack Страницы: 42

Бренд: Radio Shack Страницы: 56

Бренд: Radio Shack Страницы: 56

Бренд: Radio Shack Страницы: 124

Бренд: Jireh Страницы: 59

Бренд: SAGEMCOM Страницы: 36

Бренд: Radio Shack Страницы: 56

Бренд: NCR Страницы: 6

Бренд: Uniden Страницы: 35

Бренд: Uniden Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды