QMS 4525 Print, Руководство пользователя системы

Страница: 81 / 180

Selecting a
Language or
Emulation
5-11 Printing Your Files
„
LN03
„
CCITT Groups 3 and 4
Selecting the Default Language or Emulation
The system administrator chooses a default language or emulation
from the control panel or from a console. (See the system administra-
tor's guide for additional information.) The default language is used for
print jobs when the language is not specified by the application, the
DOC %%IncludeFeature: emulation command, or network com-
mands.
Using ESP
ESP examines each file and selects the correct language or emula-
tion for it. You can bypass ESP by selecting the appropriate language
or emulation with QMS DOC or other network commands.
Using QMS DOC
The QMS DOC command syntax for language/emulation selection is
%%IncludeFeature: emulation ( language)
Your choices for language are esp, postcript, impress, pcl5, hpgl, line-
printer, ln03+, and ccitt. See the QMS Crown Document Option Com-
mands manual for complete information.
Using VMS Commands
If you are connected to the printer through a DECnet network, you
can use the VMS PRINT command parameter DATA_TYPE to select
a language or emulation.
The PRINT command syntax for language/emulation selection is
$ PRINT/PARAM=(DATA_TYPE= LANGUAGE)filename
Your choices for LANGUAGE are ESP, POSTSCRIPT, IMPRESS,
PCL, HPGL, LN03+, and CCITT. Replace filename with the name of