QMS 2425, Справочник

Страница: 160 / 244

+3*/&RORU
(QFRGLQJ
406785%23ULQW6\VWHP5HIHUHQFH
+3*/&RORU(QFRGLQJ
The term “pen” in the HP-GL emulation refers to a logical pen (in
other words, the current pen position) rather than to a physical pen on
a plotter. A pen and a pen color are selected to draw images. This
emulation supports 8 pens and pen colors.
Since your QMS 2425/2425 TURBO Print System is a monochrome
(black and white) printer, the pen colors are converted to shades of
gray. The default color mappings for the 8 pens are as follows:
» Note: The default color for both pen 1 and pen 2 is black. However,
the pen width for these two pens is different. Pen 1 is 0.7 mm and pen
2 is 0.3 mm.
The printer maps each pen to its assigned color, then converts the
color to a grayscale using the National Television System Committee
(NTSC) standard equation for encoding color. This equation converts
a given set of CMYK values to grayscale. For the 8 pen colors
assigned to pens 1 - 8, the printer uses the designated grayscale; for
any other pen color, the printer uses the following equation:
[(C*0.3) + (M*0.59) + (Y*0.11) + K]
÷
255
» Note: This equation assumes that each grayscale is a byte value that
ranges from 0 to 255 (100%). If the sum of the left-side (calculation in
brackets) of the NTSC equation is greater than 255, then the sum is
set equal to 255.
™
Pen Pen Color Level of Gray
1
2
3
4
5
6
7
8 Black
Black
Red
Green
Blue
Violet
Orange
Brown 100%
100%
70%
41%
89%
59%
25.8%
50%