QMS 2425, Справочник

Страница: 108 / 244

0HPRU\
406785%23ULQW6\VWHP5HIHUHQFH
/RDGLQJWKH3RVW6FULSW(UURU+DQGOHU
Error Handler is a diagnostic tool that identifies PostScript errors
encountered during a print job.
0HPRU\
This submenu allows you to allocate the printer’s memory (RAM)
among the various memory clients. The flexibility of defining memory
available to clients allows experienced users to optimize the printer's
performance according to a given set of conditions.
This section briefly describes each of the memory submenus and the
memory clients. See chapter 5, “Additional Technical Information,” for
Choices Yes—Check the hard disk for and execute the
SYS\START file when the printer is turned on.
No—Don’t check the hard disk for a SYS/START file.
Default
Yes
Notes This file does not print. Information on creating a
SYS\START file is available via Q-FAX (see appendix A,
“QMS Customer Support,” for information on using Q-
FAX).
Menu Administration/Startup Options/Do Error Handler
Choices
Yes—Load the Error Handler at power on.
No—Don’t load the Error Handler.
Default No
Notes
Refer to the PostScript Language Reference Manual
(Adobe Systems Incorporated, Reading, PA: Addison-
Wesley, 1990, ISBN 0-201-18127-4) for more
information on PostScript errors.