QMS 2060, Дополнительное руководство

Страница: 93 / 160

&URZQ&RS\
6WRUDJHDQG6FDQQLQJ'HYLFHV
&URZQ&RS\
The QMS CrownCopy option consists of QMS CrownCopy Image
Scanner. This feature doubles the functionality of your printer, trans-
forming it into a copier as well as a printer. The functionality of Crown-
Copy is built into the QMS 2060 Print System. Using CrownCopy is as
simple as making the connections and pushing the Copy key.
The scanner provides a standard flat bed for copying single sheets or
pages of a bound book while the automatic document feeder (ADF)
provides automatic copying of up to 50 sheets.
3ULQW6\VWHP5HTXLUHPHQWV
To use CrownCopy, your printer must have
„
An internal IDE hard disk—80 MB or larger
» Note: The printer’s hard disk is used for temporary storage of the
scanned image. There should be enough extra room on the hard
disk to store the largest size scanned image. The size of this
image depends on the paper size and the resolution setting on
the printer.
„
At least 24 MB RAM
:KDWV,QWKH.LW¶
The scanner kit contains the following:
„
QMS CrownCopy scanner
„
Power cord (110-volt)
„
SCSI terminator and interface cable
„
Daisy-chain connector
„
Output paper stacker
„
Packing list and instruction sheet
„
Warranty and registration card
„
Copy key