QMS 2060, Руководство по установке, Страница: 27 / 52

Install a Network
Print Monitor
23 QMS 2060 WX Print System Setup Guide
13 Remove the disk or CD-ROM from the PC, and store it in a
safe place.
Install a Network Print Monitor
» Note: If you connected your printer via the parallel port, you can skip
this section. The QMS Network Print Monitor is used only with
printers connected to an Ethernet network.
The QMS Network Print Monitors (QMSMON) for Windows 95 and
Windows NT 3.51/4.0 are designed specifically for QMS printers
using TCP/IP protocol to transport print jobs and access printer status
information.
Windows 95
» Note: If you’re using Windows NT, refer to the installation instructions
on page 29.
The QMS Network Print Monitor is installed on your Microsoft
Windows 95 workstation or server. A setup script (SETUP.EXE) is
provided on the QMS Network Print Monitor for Windows 95 disk or
CD-ROM. This file is also available electronically on the Internet,
CompuServe, and the QMS Bulletin Board. See appendix A, “QMS
Customer Support,” for access information.
» Note: You must be logged on as a member of the Administrator group
to install the QMS Network Print Monitor. Also, the TCP/IP network
software must be installed.
Install the Print Monitor
1 Insert the disk or CD-ROM on which the QMS Network Print
Monitor for Windows 95 is located in the appropriate disk
drive on your PC.
2 In Windows 95 Explorer change to the drive in which you
inserted the disk in step 1.