QMS 2060, Руководство по установке, Страница: 14 / 52

Load the Media
Cassette
QMS 2060 WX Print System Setup Guide 10
Load the Media Cassette
The QMS 2060 WX Print System comes standard with a 250-sheet
universal cassette. Loading media in the cassette involves the follow-
ing steps:
n
Prepare the paper
n
Load the paper
Prepare the Paper
» Note: Ensure that the media size matches the cassette size (for
example, letter/A4 media must be loaded only when the universal
cassette is set to letter/A4 size or when a letter/A4 cassette is
available). Since the media cassette sends a media size signal to the
printer controller, using the wrong size media will cause your image to
be positioned incorrectly on the page or clipped.
1 Unwrap the paper, and pull the stack out.
» Note: Don’t unpack the paper above the printer because this
might cause particles to fall into the printer components. Note the
arrows on the wrapper. They show which side of the paper should
be on the top when it’s loaded in the cassette.
2 With one hand at each end of the stack, lift and hold it in a
curved position, without gripping.
3 Grip each end of the stack firmly.
4 Straighten the stack, and then roll the fanned sheets from
side to side to get air through the sheets and prevent static
buildup.
5 Take off the top and bottom sheets.
s
Caution: The top and bottom sheets sometimes have residual
glue buildup that could cause the printer to jam.