QMS 2025, Руководство администратора

Страница: 21 / 158

Changing Default
Configuration
Settings
1-11 Introduction
Changing Default
Configuration Settings
There are two types of printer menu options: those that require you to
choose from a selection of possible choices and those that require
you to enter an alphanumeric value. Many default settings may never
need changing.
Selection of Choices
If an option has choices, the second line of the message window dis-
plays each choice one at a time. To view all the possible choices for
that option, press the Next key repeatedly. The menu cycles through
all the choices for that option. The Administration/Communications/
Serial/Baud Rate menu is an example of an option with a selection of
choices. The following example shows how to change the baud rate
for serial communication:
1 Press the Online/Offline key to take the printer off line.
2 Press the Menu key. The message window displays
CONFIGURATION
OPERATOR CONTROL
3 Press the Next key until
ADMINISTRATION
displays on the
second line of the message window:
CONFIGURATION
ADMINISTRATION
4 Press the Select key. This opens the Administration menu.
ADMINISTRATION
now displays on the first line of the mes-
sage window:
ADMINISTRATION
COMMUNICATIONS