QMS 2025, Руководство администратора

Страница: 128 / 158

Engine
Submenu
QMS 3825/3225/2025 System Administrator’s Guide 8-8
Resolution
This option sets the default printer resolution for documents. Each
printer has a lower resolution, 300x300 dpi, for everyday memos and
drafts, and a higher setting for camera-ready work. The higher setting
on the 3825 Print System is 600x600 dpi. The higher setting on the
3225/2025 Print System is 400x400 dpi. The higher setting is the
default.
» Note: To extend the life of the motor, when the 3825 printer is set to
600x600 dpi, the engine automatically throttles back to 300x300
dpi speed after five minutes of inactivity. However, when a print job is
sent, it automatically resets to 600x600 dpi.
Print Mode
The Print Mode allows you to set the print intensity for your jobs,
which can be useful for specialized graphics or CAD jobs. Choices
are Normal, Light, and Dark, with a default of Normal.
Powersave Mode
The Powersave Mode allows you to select a time limit for the printer
to stay at full power when it is not in use. After that time expires, the
printer automatically switches to a low-power state, with the engine
on and the fuser off. When another job is sent, it takes 2.5 minutes for
the printer to warm up. You may turn off the option, so that the printer
remains at full power no matter how long it goes unused, or you may
select a time limit of 15 minutes, 30 minutes, 1 hour, 2 hours, or 3
hours. The default is 1 hour. When the printer is in Powersave Mode
and the time limit has elapsed, the message window displays
ENERGY
SAVER
instead of
IDLE
.
Maintenance Due
This option appears in the configuration menu only when there is a
maintenance message in the message window. Use this option to
clear the message after completing the appropriate maintenance.
The options are On and Off. To clear the message, select Off. The