QMS 1725E, Руководство по началу работы

Страница: 38 / 94

Printing a Start-up Page
QMS 1725E Print System Getting Started 2-14
have purchased. Follow the installation procedures described in the
chapter 6, “Printer Options,” in the
Reference guide or the manual
that came with your option kit. Otherwise, see chapter 6, “Trouble-
shooting,” of the
Operation guide for more information on problems
with printing a start-up page.
M WARNING! Turn the printer off and unplug the power cord before checking for
correct printer installation.
ACHTUNG! Schalten Sie bitte den Drucker aus und ziehen Sie auch den
Netzstecker heraus, bevor Sie die korrekte Installation des Druckers
überprüfen.
Enabling/Disabling the Start-up Page
A start-up page automatically prints when you turn on your print sys-
tem. However, you can save time, paper, and toner by disabling the
start-up page.
If you need the information included on the start-up page, (for exam-
ple, to provide to QMS Customer Technical Assurance), you can use
the PS Executive Series Utilities or the printer control panel to print a
status page instead of a start-up page.
1 To use the PS Executive Series Utilities, see the PS Execu-
tive Series Utilities on-line documentation for complete infor-
mation.
2 To use the printer control panel (Administration/Startup
Options/Do Start Page menu), see “Enabling/Disabling the
Start-up Page” in chapter 4, “Printer Configuration,” of the
Reference
guide for complete information.