QMS 1725 SLS, Руководство пользователя

Страница: 157 / 328

Testing PC
Communication
6-11 Troubleshooting Printer Problems
13 If you want to change other settings, use the Next key to
scroll to the setting you want to change, then repeat the pro-
cedure described in steps 6 through 8. Otherwise press the
Online/Offline key.
The message window displays
SAVE CHANGES?
NO
14 To save your change, press the Next key so that the mes-
sage window displays
SAVE CHANGES?
YES
15 Press the Select key to save the change.
The Online/Offline indicator lights, and the message window dis-
plays
IDLE
Verifying the Serial Port Setting Changes
1 Reboot the printer.
2 Compare the serial port settings listed on the start-up page
to those in your AUTOEXEC.BAT file.
3 Try the communication test again.
If a blank page ejects from the printer, the printer and the com-
puter are communicating. Continue with “PC Printing Software,”
to finish connecting the printer. If a blank page does not eject and
you typed the file correctly, go to the “Printer Problem Checklist”
section later in this chapter and refer to your DOS documentation
for more information.