QMS 1660E, Начало работы

Страница: 64 / 114

Configuring the
Interface
QMS 1660E Print System Getting Started 4-10
Windows
1 With the PC on and Windows running, insert the disk con-
taining the CrownAdmin software for Windows in the disk
drive.
2 From the File menu in Program Manager choose Run.
» Note: You can’t install the utilities by copying files from the disks.
You must run the installation program.
3 In the Run dialog box, type
x :setup
↵
where
x
is the name of the drive in which you inserted the
Utilities disk (for example,
a:setup
↵
) and choose OK.
4 When prompted, specify the directory in which to install the
utilities.
5 Follow the instructions on the screen.
6 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
7 Go to the next section, “Configuring the Interface.”
Configuring the Interface
This section describes the quick configuration procedure for the
printer interface. For a complete discussion of all of the configuration
options available through the Administration/Communications/Net-
work
x
/CrownNet menu, see chapter 2, “Interface Configuration,” of
the
QMS CrownNet Interface System Administrator’s Guide
.
You can make these configuration changes through any of the follow-
ing means:
n
Printer Control Panel—For information on using the printer con-
trol panel to change configuration menu settings, refer to chapter
4, “Printer Configuration,” of the
Reference
.