2
3
(1) Install mounting brackets using supplied
screws for inside mount using top mount holes.
Measure/ mark/ pre-drill and install brackets 2-6
inches from edge of bracket to window jamb.
Be Advised:
For Cassette systems greater than
4 ft, you will be supplied with additional mounting
brackets. Evenly space these brackets dividing the
total width of window opening by the number of
brackets supplied.
(3) Rotate cassette into vertical position towards
wall or window until you hear and see the bottom
of mounting bracket snap into place.
Be Advised:
Check to be sure all brackets have
snapped into position before releasing the cassette
system.
INSTALLATION TYPE: INSIDE MOUNT
INSTALLATION TYPE: OUTSIDE MOUNT
(1) Install mounting brackets using supplied
screws for outside mount using back mount
holes. Measure/ mark/ pre-drill and install brack-
ets 2-6 inches from edge of bracket to edge of
shade
1
1
(2) Position cassette as shown to hook bracket
on cassette.
Shown in bracket lock position
Back mounting
holes
Top mounting
holes
2”- 6”
2”- 6”
Cassette Installation Instructions
Always wear personal protection equipment, including safety glasses and gloves, when installing. If the shade is
out of reach, use a ladder per its manufacturer’s instructions
.
9000142 - Revision 10.10.14
