B – Command Line Interface
Show Command
B-52
59042-03 A
D
post log
Displays the Power On Self Test (POST) log which contains results from the
POST.
setup [option]
Displays setup attributes for the system, SNMP, and the switch manufacturer.
Refer to the
”Show Setup Command” on page B-67
steering
[domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit
[domain_id], the system displays routes for all switches in the fabric.
support
Executes a series of commands that display a complete description of the switch,
its configuration, and operation. The display can be captured from the screen and
used for diagnosing problems. This keyword is intended for use at the request of
your authorized maintenance provider. The commands that are executed include
the following:
Alias List
Config List
Date
History
Ps
Show (About, Alarm, Backtrace, Chassis, Config Port, Config Switch, Config
Threshold, Dev, Dev Settings, Domains, Donor, Fabric, Log, Log Settings,
Lsdb, Mem, Ns, Perf, Port, Setup Mfg, Setup Snmp, Setup System,
Steering, Switch, Topology, Users)
Uptime
TotalRxFrames
Total number of frames received by this port.
TotalRxWords
Total number of words received by this port.
TotalTxFrames
Total number of frames issued by this port.
TotalTxWords
Total number of words issued by this port.
TxLinkResets
Number of Link Resets issued by this port.
TxOfflineSeq
Total number of Offline Sequences issued by this port.
TxWaits
Time waiting to transmit when blocked with no credit.
Measured in FC Word times.
Table B-15. Show Port Parameters (Continued)
Entry
Description
