3–Fibre Channel Configuration
Configuring OoOFR
55
BK3254601-00 C
Configuring OoOFR
Out-of-order frame reassembly (OoOFR) reassembles out-of-order frames as
they are received, minimizing network congestion by eliminating the
retransmission of frames and exchanges. To configure OoOFR, use either
QConvergeConsole GUI or CLI.
Configuring OoOFR with QConvergeConsole GUI
To enable OoOFR with QConvergeConsole GUI:
1.
In the QConvergeConsole system tree pane on the left, select a Fibre
Channel port.
2.
In the content pane on the right, click
Parameters
.
3.
Click the
Advanced HBA Parameters
tab.
4.
Select the
Enable Receive Out of Order Frame
check box.
Configuring OoOFR with Interactive QConvergeConsole CLI
To enable OoOFR with the interactive QConvergeConsole CLI:
1.
On the
Fibre Channel Adapter Configuration
menu, select
HBA
Parameters
.
2.
On the port menu, select a port to open the HBA Parameters menu.
3.
On the
HBA Parameters
menu, select
Configure HBA Parameters
to
open the Configure Parameters menu.
4.
Select
13: Enable Receive Out Of Order Frame
.
