Qlogic QLA200 HBA, Руководство пользователя

Страница: 47 / 54

7 – Software Applications and Utilities
Scan Fibre Channel Devices
FL0054601-00 B 7-3
Follow these steps to enable the Selectable Boot option and select the boot device:
1. From the Configuration Settings menu, use the arrow keys to choose Adapter
Settings . Enable the HBA BIOS, then press ESC to return to the Configuration
Settings menu.
2. From the Configuration Settings menu, use the arrow keys to choose
Selectable Boot Settings .
3. Press ENTER to enable or disable (toggle) the Selectable Boot option. Use
the down arrow key to select the device location.
4. Press ENTER to see a list of accessible devices (these are the devices in the
Select Fibre Channel Device menu).
5. Select a drive by using the arrow keys to scroll down to the device you want to
put into your Selectable Boot menu list. Press ENTER.
This step selects the requested device and loads it into the Selectable Boot
menu, then returns you to the Selectable Boot menu from the Select Fibre
Channel Device menu. The selected device displays in the Selectable Boot
menu.
If your system has other disks installed and you enabled the QLA200 Selectable
Boot option to boot from the QLA200, and your system does not boot from the
QLA200 HBA, you may need to enter your system BIOS setup utility to select the
Fibre Channel disk attached to the QLA200 HBA to be the boot device.
NOTE: This option applies only to hard disks; it does not apply to tape drives and
other nondisk devices.
7.2.3
Restore Default Settings
The Restore Defaults option from the Configuration Settings menu restores the
QLA200 HBA default settings.
7.3
Scan Fibre Channel Devices
This option scans the FC loop and lists all the connected devices by loop ID.
Information about each device is listed, for example, vendor name, product name,
and revision. This information is useful when configuring your QLA200 HBA and
attached devices.