Qlogic QLA200 HBA, Руководство пользователя

Страница: 23 / 54

3 – SANsurfer HBA Install Wizard (Windows 2000/Server 2003)
Updating the Driver
FL0054601-00 B 3-7
3.3
Updating the Driver
Perform the following steps if a Windows 2000/Server 2003 driver is already installed
and you want to install an updated version of the driver:
You must have internet access if you want to update the driver from
the QLogic web site.
Step 1. Insert the SANsurfer Fibre Channel HBA Software CD in an appropriate
drive. The
SANsurfer Fibre Channel HBA Software screen displays.
Step 2. Click Drivers and Application . The SANsurfer HBA Software screen
displays.
Step 3. In the table titled 2Gb FC - QLA200 Series , click the appropriate operating
system: Windows 2000 or Windows Server 2003 . The SANblade Fibre
Channel HBA Management Software and Drivers screen displays.
Step 4. In the table titled 2Gb FC - QLA200 Series , click Click Here to Install .
The File Download dialog box displays.
Step 5. You can run the SANsurfer HBA Install Wizard from the CD. Optionally,
you can download the wizard to the server and run it from there. Do one
of the following:
❑
Click Open or Run to run the SANsurfer HBA Install Wizard from the CD.
❑
Click Save to download the application to the computer’s hard disk. The
Save As dialog box displays. Specify a location on the hard disk, then
click Save . From that location, double-click the installation file
qlflzip.exe .
The SANsurfer HBA Install Wizard starts automatically. If the wizard does
not start and you are running the wizard from the CD, do the following:
❑
Select the drive where the SANsurfer Fibre Channel HBA Software CD
is located.
❑
In the \data\files\windows directory, double-click the installation file
qlflinst.exe .
Step 6. The HBA Configuration Update dialog box displays.
Step 7. Click Update Driver . Continue with step 7 in section 3.2 .
NOTE