Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя

Страница: 81 / 366

5–Fibre Channel Noninteractive Commands
-gs (Show HBA Statistics)
SN0054667-00 C 5-13
The following restrictions apply:
 Under Linux, this feature is disabled if you are using the IOCTL or sysfs
(inbox) driver.
 Under Mac OS
®
, the
BindWWPN
and
BindPortID
parameters are not
changeable; Mac OS supports only the
BindWWPN
parameter.
-gs
(Show HBA Statistics)
To view the adapter statistics, issue the following command:
# qaucli -pr fc -gs
(
< hba instance > | < hba wwpn >) [(< param name > |
< param alias >) < param value >]
Where:
Table 5-5 lists the adapter statistics parameter names, aliases, and values.
Table 5-4. Driver Settings Parameters
Description
Parameter Name
<param name>
Alias
<param
alias>
Value
a
<param
value>
a
0 = Disabled, 1 = Enabled
Persistently bound target(s) only
PersistentOnly PO
0, 1
Present persistently bound tar-
get(s) plus any new target(s) with
driver default
PersistentPlusNew PN
0, 1
Present targets with driver default
NewOnly b
b Driver parameter
NewOnly
(
NO
) is supported only with the failover driver. If you select a QLA22 xx
adapter, all QLA22 xx adapters on the host will use the same settings. If you select a 23 xx adapter,
all 2G/4G adapters on the host will also use the same settings.
NO
0, 1
Bind devices by WWPN
BindWWPN BW
0, 1
Bind devices by port ID
BindPortID BP
0, 1
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameter (see table 4-7)
param alias = Alias of the parameter (see table 4-7)
param value = New value of the parameter (see table 4-7)