Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя, Страница: 130 / 366

6–iSCSI Noninteractive Commands
-sbootcode (Set Secondary Boot Target Information)
6-24 SN0054667-00 C
-sbootcode
(Set Secondary Boot Target Information)
To set the secondary boot target and LUN, issue the
-sbootcode
command as
follows:
-sbootcode < hba_port_inst> < Boot Target > < Boot LUN >
Issuing this command saves the configuration data to an XML file portable to all
platforms supported by iSCSI. This command is not active for PPC.
For primary boot code, see “-pbootcode (Set Primary Boot Target Information)” on
page 6-19 .
-sbootcodecid
(Set Alternative Client ID)
To set the alternative client ID (seven characters maximum), issue the
-sbootcodecid
command as follows:
-sbootcodecid < hba_port_inst> < Alternative Client ID >
This command is not active for the PPC.
-sdmrc
To return the SDM library return code, issue the
-sdmrc
command as follows:
-sdmrc [Simple_Pattern]
When
[
simple pattern
]
is given, only the lines containing that string are
printed.
-stadd
To add a send target for discovery, issue the
-stadd
command as follows:
-stadd
< hba_port_inst > < ip address > [ chapIndex ] [< TGBCA > < value >]
Where
< value >
can be
on
or
off
;
on
causes the send target login to require
bidirectional CHAP.