Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя

Страница: 112 / 366

6–iSCSI Noninteractive Commands
-dc (Display Destination Cache [IPv6 only])
6-6 SN0054667-00 C
-dc
(Display Destination Cache [IPv6 only])
The IPv6 destination cache contains the IP address, next-hop IP address, and
path MTU information about both local and remote destinations. For multicast and
on-link unicast destinations, the next-hop IP address always matches the
destination IP address. For unicast destinations that are off-link, the next-hop IP
address is the IP address of the router.
To display the destination cache, issue the
-dc
command as follows:
-dc < hba_port_inst >
-dce
To display the connection error logs for up to 100 latest connections, issue the
-dce
command as follows:
-dce < hba_port_inst > < target_id > < filename >
If
< hba_port_inst >
and
< target_id >
are not specified, all entries for all adapter
ports are displayed. If
< filename >
is specified, then the log is written to that file.
-defbidi
To add a default BIDI CHAP entry to the specified
hba_port_inst
, issue the
-defbidi
command as follows:
-defbidi < hba_port_inst > < chap_secret >
Where
< chap_secret >
is the CHAP secret.
The adapter is reset after this command is issued.
-delchap
(Delete a CHAP Entry)
To delete the specified CHAP entry, issue the
-delchap
command as follows:
-delchap < hba_port_inst> < CHAP >
Issuing this command resets the adapter.
-df
To view the firmware properties, issue the
-df
command as follows:
-df < hba_port_inst>
QConvergeConsole CLI displays information about the adapter: model, serial
number, port number, iSCSI name, alias, IP address, instance number, and the
following firmware information:
 FW information for instance
 FW version