Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя

Страница: 111 / 366

6–iSCSI Noninteractive Commands
-ch (HBA Information)
SN0054667-00 C 6-5
-ch
(HBA Information)
To display the adapter’s configured settings, issue the
-ch
command as follows:
-ch [ hba_port_inst ]
When you specify a port instance, information for only that adapter is shown.
When you do not specify a port instance, information for all adapter ports in the
system is shown.
-chapmap
(Display Targets Using CHAP Entries)
To display the map of targets to CHAP table entries, issue the
-chapmap
command as follows:
-chapmap <hba_port_inst>
-cpbootcode
(Clear Primary Boot Target Information)
To clear the primary boot target and LUN, issue the
-cpbootcode
command as
follows:
-cpbootcode <hba_port_inst>
-csbootcode
(Clear Secondary Boot Target Information)
To clear the secondary boot target and LUN, issue the
-csbootcode
command
as follows:
-csbootcode <hba_port_inst>
-d
(Install HBA Driver, All Adapters)
To install an adapter driver for all iSCSI adapters on the system from a
.zip
or
.inf
file, issue the
-d
command as follows:
-d < file_name >
A system reboot may be required; see the log file for details.
NOTE:
This command is not active for the PPC.